> For the complete documentation index, see [llms.txt](https://docs.lumidb.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.lumidb.com/explore-and-analyze/cross-section-tool.md).

# Cross section tool

This article shows how the cross section tool can be used to project sections of the data to 2D and how to take measurements with them.

1. Click **Cross section** in the toolbar. It opens the cross section pane at the bottom and activates the line section measurement tool.
2. Click the 3D view first to select the start point and then the end point for the cross section. Observe the geometry between these two points being shown in the cross section pane.
3. Use **Flip** to change the start and end points of the cross section, effectively to flip the 2D view across the up axis. Use **Fit** to fit the section to the pane.
4. To get more or less points visible on the 2D pane, adjust the **Depth**. You can enter it in meters (**m**), centimeters (**cm**) or millimeters (**mm**). This will collect points from wider volume on both sides of the line that was drawn.
5. Select the **Measure** tool in the cross section pane to do a line measurement on the 2D pane.
   1. You can use the grid lines to get a straight vertical or horizontal measurement.
   2. If you place the two measurement points at an angle, you will get both the horizontal and vertical measurements, as well as the direct distance measurement.
   3. To clear the measurements, click **Clear** on the 2D pane.
6. To close the pane, click the **X** in its top right corner. The cross section stays in the **Layers** panel. To remove it completely, open the cross section from the **Layers** panel, click the **...** button at the top of its panel, then click **Clear**.

<figure><img src="https://150512722-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FMI9s5xLuAdXOTKpfljc3%2Fuploads%2FcXefeN7cBQZlH4teG29h%2F01-cross-section.jpg?alt=media" alt="The cross section pane at the bottom of the project view, with the Cross section tool and the Flip button highlighted"><figcaption><p>The cross section pane</p></figcaption></figure>

The cross section panel on the right shows the details of the section: the coordinates, the 3D distance, the ground distance, the height and the slope.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://docs.lumidb.com/explore-and-analyze/cross-section-tool.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
